[1]熊林张正林赵文伟.新型换热器在氧化铝分解中间降温的试用[J].大众科技,2018,20(08):46-48.
　Application of New Type Heat Exchangers on the Cooling of Intermediate Decomposition in Aluminium Oxide Production[J].Popular Science & Technology,2018,20(08):46-48.
点击复制

新型换热器在氧化铝分解中间降温的试用()

分享到：

《大众科技》[ISSN:1008-1151/CN:45-1235/N]

Title:: Application of New Type Heat Exchangers on the Cooling of Intermediate Decomposition in Aluminium Oxide Production

摘要:: 拜耳法氧化铝生产中，分解中间降温是获取高分解率和完善析出晶体晶型结构的重要措施之一。文章针对广西某氧化铝厂分解槽卧式宽道换热器老化的问题，试用了立式宽通道板式换热器和螺旋板式换热器两种新型换热器，结果表明，与传统的卧式宽流板道式换热器相比，这两种新型换热器的降温效果更好，分解槽进出料温差均能达到 2℃以上，实现了分解槽料的提前降温分解，增加了换热器设备选型的选择，对新型换热器的进一步推广应用具有积极意义。

Abstract:: In the production process of aluminium oxide using Bayer method, the cooling of intermediate decomposition is one of the important measures to obtain high decomposition rate and perfect the crystal structure of precipitation. Aiming at the aging of the horizontal wide channel heat exchanger used in the decomposer of one of alumina plants in Guangxi, vertical wide channel heat exchanger and spiral-plate heat exchanger were used in the decomposer respectively. The results showed that compare to horizontal wide channel heat exchanger, they have better cooling effects and the temperature differences of in and out of materials over 2 °C, which can accelerate the cooling of the materials in the composers. It provides more choices for the selection of heat exchanger and has a positive significance on the further popularization and application of new type heat exchangers.

[1] 毕诗文.氧化铝生产工艺[M].北京:化学工业出版社,2006. [2] 谭天恩.过程工程原理(化工原理)[M].北京:化学工业出版社,2004.

备注/Memo:: 【收稿日期】2018-06-08 【作者简介】熊林（1972－），中国铝业股份有限公司广西分公司工程师，研究方向为有色金属冶炼生产技术管理；张正林（1976－），中国铝业股份有限公司广西分公司高级工程师，研究方向为有色金属冶炼生产技术研发及管理；赵文伟（1970－），中国铝业股份有限公司广西分公司工程师，研究方向为氧化铝生产技术研究。

更新日期/Last Update: 2018-09-05