[1]张旭升 李 江 陈智鸣.响应曲面法优化CTD 气流干燥工艺参数[J].大众科技,2014,16(08):92-94.
　High simulation of virtual manipulator based on IO card[J].Popular Science & Technology,2014,16(08):92-94.
点击复制

响应曲面法优化CTD 气流干燥工艺参数()
分享到：

《大众科技》[ISSN:1008-1151/CN:45-1235/N]

卷:
第16卷
期数:
2014年08期
页码:
92-94
栏目:
电力与机械
出版日期:
2014-12-28

文章信息/Info

Title:
High simulation of virtual manipulator based on IO card
文章编号:
1008-1151(2014)08-0092-03
作者:
张旭升 李 江 陈智鸣
广西中烟工业有限责任公司南宁卷烟厂，广西 南宁 530001
关键词:
整丝率; CTD 气流干燥; 响应曲面法; MINITAB 软件
Keywords:
PLC; manipulator; experiment of manipulator system
分类号:
TN76
文献标志码:
A
摘要:
为提高叶丝整丝率，通过单因素试验，运用响应曲面法优化CTD 气流干燥工艺参数。试验结果表明：工艺气体含氧量、工艺气流量和工艺气体温度对CTD 气流干燥出口叶丝整丝率都有显著影响。在工艺气体含氧量为2.77%、工艺气流量为18500 m?/h、工艺气体温度为174℃条件下，CTD 气流干燥出口叶丝整丝率达到最高。
Abstract:
In the virtual simulation experiment system,there are many defects and shortcomings in the traditional experiment system.Such as: image is not intuitive, simulation is not high, especially in some complex control object, or involve the mode of analog input andoutput control for closed loop control, adopting the physical build small experiment system, but there is more investment and covers an areaof large faults, can not guarantee each operator to operate, make it only for the use of demonstration finally. Unable to upgrade to raises thestudent beginning ability of PLC wiring. This system based on the manipulator,make full use of PLC, I/O card and the advantagesof configuration software,design a new virtual simulation experiment mode, so that students can better cultivate and develop the students’good practice ability, and can feel the real experimental system intuitively, so as to achieve a realmanipulator connecting line high simulation of virtualexperiment system.

参考文献/References:

1] 马林,何桢.六西格玛管理[M].北京:中国人民大学出版社,2007:359-375.[2] 国家烟草专卖局.卷烟工艺规范[M].北京:中央文献出版社,2003.[3] YC/T178-2003.烟丝整丝率、碎丝率测定方法[S].北京:国家烟草专卖局,2003.[4] 罗登炎.叶丝低温气流干燥关键影响因素研究[J].海峡科学,2013,(2):3-6.[5] 马逢时,刘传冰.六西格玛管理统计指南——MINITAB使用指导[M].北京:中国人民大学出版社,2007:538-567.

备注/Memo

备注/Memo:
【收稿日期】2014-07-12【作者简介】吉人（1976－），男，吉林人，四川峨眉旅游股份有限公司金顶索道分公司工程师。
更新日期/Last Update: 2016-03-15